Skip to content

Page Fire and EMS Frequencies

We do not have frequencies listed specifically for Page in Mille Lacs County, Minnesota yet. Countywide channels for Mille Lacs County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Onamia (Allied Radio Matrix for Emergency Response (ARMER)), about 12 miles away.

About Page Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Page: Mille Lacs County Fire 154.0700 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Mille Lacs County Fire talkgroup 43216 (hex a8d0).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Page, start with the Onamia site of Allied Radio Matrix for Emergency Response (ARMER), about 12 miles away. Its control channels: 856.9625, 857.4625 MHz.

Data updated .

Mille Lacs County channels that also cover Page

Fire Dispatch

Fire Dispatch frequencies for Mille Lacs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mille Lacs County FireFire Paging154.0700FMN—

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Mille Lacs County FireCounty Fire43216a8d0D
Mille Lacs County FireFire Common43320a938D
Mille Lacs County EMSMille Lacs Co EMS Call43282a912D
Mille Lacs County EMSOnamia Hospital ER43276a90cD

Nearest trunked radio sites

Distances are measured from the center of Page.

Onamia · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 81 (hex 51) · NAC 40A · about 12 mi away
Control 856.9625, 857.4625
Voice 856.4625, 857.7625, 858.4625, 858.7625
Gilman - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 49 (hex 31) · NAC 400 · about 12 mi away
Control 852.4, 852.725
Voice 851.425, 851.8, 851.9, 852.275, 852.875, 853.475, 853.525, 853.825
Olgilvie · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 75 (hex 4B) · NAC 40C · about 13 mi away
Control 853.075, 853.875
Voice 851.375, 851.95, 852.75, 853.3125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Page?

We do not have a fire dispatch channel listed specifically for Page. The county-level fire dispatch channels in the same county: Mille Lacs County Fire 154.0700 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Page?

Yes. The county-level systems that cover Page are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Page?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Page?

For Page, start with the Onamia site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.9625, 857.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.