Skip to content

Mille Lacs County Fire and EMS Frequencies

Mille Lacs County in Minnesota has 1 countywide conventional frequency and 4 countywide talkgroups in our database. Use the list of 23 cities and communities below for local fire departments and EMS agencies.

About Mille Lacs County Fire and EMS Frequencies

Quick answer: Fire dispatch for Mille Lacs County: Mille Lacs County Fire 154.0700 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Mille Lacs County Fire talkgroup 43216 (hex a8d0).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Mille Lacs County, start with the Wahkon site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 856.2125, 857.0875 MHz.

Data updated .

Mille Lacs County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Mille Lacs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mille Lacs County FireFire Paging154.0700FMN—

Mille Lacs County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Mille Lacs County FireCounty Fire43216a8d0D
Mille Lacs County FireFire Common43320a938D
Mille Lacs County EMSMille Lacs Co EMS Call43282a912D
Mille Lacs County EMSOnamia Hospital ER43276a90cD

Radio system sites in Mille Lacs County

Program the control channel first; your scanner finds the voice channels from it.

Wahkon · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 9 (hex 9) · NAC 409
Control 856.2125, 857.0875
Voice 855.2125, 855.9875, 856.7375, 859.9625
Onamia · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 81 (hex 51) · NAC 40A
Control 856.9625, 857.4625
Voice 856.4625, 857.7625, 858.4625, 858.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Mille Lacs County

Common questions

What frequency does the fire department use in Mille Lacs County?

Fire dispatch channels listed for Mille Lacs County: Mille Lacs County Fire 154.0700 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Mille Lacs County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Mille Lacs County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Mille Lacs County?

For Mille Lacs County, start with the Wahkon site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.2125, 857.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Mille Lacs County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Mille Lacs County are marked encrypted.

Are Mille Lacs County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Mille Lacs County are marked encrypted.