About South Harbor Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers South Harbor: Mille Lacs County Fire 154.0700 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Mille Lacs County Fire talkgroup 43216 (hex a8d0).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For South Harbor, start with the Wahkon site of Allied Radio Matrix for Emergency Response (ARMER), about 2 miles away. Its control channels: 856.2125, 857.0875 MHz.
Data updated .
Mille Lacs County channels that also cover South Harbor
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mille Lacs County Fire | Fire Paging | 154.0700 | FMN | — |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mille Lacs County Fire | County Fire | 43216 | a8d0 | D |
| Mille Lacs County Fire | Fire Common | 43320 | a938 | D |
| Mille Lacs County EMS | Mille Lacs Co EMS Call | 43282 | a912 | D |
| Mille Lacs County EMS | Onamia Hospital ER | 43276 | a90c | D |
Nearest trunked radio sites
Distances are measured from the center of South Harbor.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in South Harbor?
We do not have a fire dispatch channel listed specifically for South Harbor. The county-level fire dispatch channels in the same county: Mille Lacs County Fire 154.0700 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in South Harbor?
Yes. The county-level systems that cover South Harbor are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in South Harbor?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in South Harbor?
For South Harbor, start with the Wahkon site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.2125, 857.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.