Skip to content

Morrison County Fire and EMS Frequencies

Morrison County in Minnesota has 2 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 39 cities and communities below for local fire departments and EMS agencies.

About Morrison County Fire and EMS Frequencies

Quick answer: Fire dispatch for Morrison County: Morrison County Fire 154.2200 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Morrison County Fire talkgroup 43040 (hex a820).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Morrison County, start with the Lincoln site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 858.9625, 859.4375 MHz.

Data updated .

Morrison County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Morrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morrison County FireMorrison County Fire – Paging154.2200
In 153.8900
123.0 PLFMNWNVD602

Hospitals & Medical

Hospitals & Medical frequencies for Morrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morrison County HospitalSaint Gabrial's Hospital (L. Falls)155.3850127.3 PLFMNWQBS494

Morrison County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Morrison County FireCounty Fire Dispatch43040a820D
Morrison County FireMLMB Fire Administration43050a82aD
Morrison County EMSMayo EMS Dispatch43078a846D
Morrison County EMSMayo – Patient Update248866136D
Morrison County EMSHART First Responders Administration43084a84cD

Radio system sites in Morrison County

Program the control channel first; your scanner finds the voice channels from it.

Lincoln · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 12 (hex C) · NAC 406
Control 858.9625, 859.4375
Voice 852.2, 855.9625, 857.9625, 858.4375
Morrison Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 42 (hex 2A)
Control 852.475, 853.1
Voice 851.25, 852.1, 853.4, 855.2375, 856.9375, 857.9375, 858.9375, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Morrison County

Common questions

What frequency does the fire department use in Morrison County?

Fire dispatch channels listed for Morrison County: Morrison County Fire 154.2200 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Morrison County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Morrison County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Morrison County?

For Morrison County, start with the Lincoln site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 858.9625, 859.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Morrison County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Morrison County are marked encrypted.

Are Morrison County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Morrison County are marked encrypted.