Skip to content

Burke Fire and EMS Frequencies

We do not have frequencies listed specifically for Burke in Pipestone County, Minnesota yet. Countywide channels for Pipestone County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Chandler (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Burke Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Burke: Pipestone County Fire 151.2350 MHz, narrow FM, 186.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Pipestone County Fire talkgroup 30301 (hex 765d).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Burke, start with the Chandler site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.425, 856.4375 MHz.

Data updated .

Pipestone County channels that also cover Burke

Fire Dispatch

Fire Dispatch frequencies for Pipestone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pipestone County FireCounty Paging151.2350
In 156.0300
186.2 PLFMNWPTN695
Pipestone County FireCounty Fire/EMS Dispatch155.9250
In 153.7850
141.3 PLFMNWPFY642

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pipestone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pipestone County FireRepeater154.2350
In 150.7900
054 DPLFMNWNXD771

Hospitals & Medical

Hospitals & Medical frequencies for Pipestone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pipestone County HospitalPipestone County Hospital151.9550
In 158.3400
FMNWPKN808
Pipestone County HospitalPipestone Medical Center155.400088.5 PLFMNKRK983

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Pipestone County FireFire EMS Dispatch30301765dD
Pipestone County HospitalHospital – EMS303137669D

Nearest trunked radio sites

Distances are measured from the center of Burke.

Chandler · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 36 (hex 24) · NAC 400 · about 7 mi away
Control 851.425, 856.4375
Voice 852.875, 853.425, 859.2625
Trosky · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 37 (hex 25) · NAC 404 · about 7 mi away
Control 852.475, 856.4875
Voice 851.45, 856.2625, 857.4875
Holland · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 90 (hex 5A) · NAC 40F · about 9 mi away
Control 851.75, 852.45
Voice 852.9625, 858.4875, 859.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Burke?

We do not have a fire dispatch channel listed specifically for Burke. The county-level fire dispatch channels in the same county: Pipestone County Fire 151.2350 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Burke?

Yes. The county-level systems that cover Burke are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Burke?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Burke?

For Burke, start with the Chandler site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.425, 856.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.