About Gray Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Gray: Pipestone County Fire 151.2350 MHz, narrow FM, 186.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Pipestone County Fire talkgroup 30301 (hex 765d).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gray, start with the Trosky site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 852.475, 856.4875 MHz.
Data updated .
Pipestone County channels that also cover Gray
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pipestone County Fire | County Paging | 151.2350 In 156.0300 | 186.2 PL | FMN | WPTN695 |
| Pipestone County Fire | County Fire/EMS Dispatch | 155.9250 In 153.7850 | 141.3 PL | FMN | WPFY642 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pipestone County Fire | Repeater | 154.2350 In 150.7900 | 054 DPL | FMN | WNXD771 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pipestone County Hospital | Pipestone County Hospital | 151.9550 In 158.3400 | FMN | WPKN808 | |
| Pipestone County Hospital | Pipestone Medical Center | 155.4000 | 88.5 PL | FMN | KRK983 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pipestone County Fire | Fire EMS Dispatch | 30301 | 765d | D |
| Pipestone County Hospital | Hospital – EMS | 30313 | 7669 | D |
Nearest trunked radio sites
Distances are measured from the center of Gray.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Gray?
We do not have a fire dispatch channel listed specifically for Gray. The county-level fire dispatch channels in the same county: Pipestone County Fire 151.2350 MHz, narrow FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in Gray?
Yes. The county-level systems that cover Gray are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gray?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gray?
For Gray, start with the Trosky site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.475, 856.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.