Skip to content

Pope County Fire and EMS Frequencies

Pope County in Minnesota has 5 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 27 cities and communities below for local fire departments and EMS agencies.

About Pope County Fire and EMS Frequencies

Quick answer: Fire dispatch for Pope County: Pope County Fire 154.3100 MHz, narrow FM, 123.0 PL. EMS dispatch for Pope County: Pope County EMS 158.7600 MHz, narrow FM, 167.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Pope County Fire talkgroup 26106 (hex 65fa).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pope County, start with the Glenwood site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.4125, 852.9125 MHz.

Data updated .

Pope County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pope County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pope County FirePope County Fire – Paging154.3100
In 150.9950
123.0 PLFMNWNJZ912
Pope County FirePope County Fire – Dispatch155.4150
In 153.8600
167.9 PLFMNWPFZ367

EMS Dispatch

EMS Dispatch frequencies for Pope County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pope County EMSGlacial Ridge Hospital – EMS Dispatch158.7600
In 151.3550
167.9 PLFMNKVF494

Hospitals & Medical

Hospitals & Medical frequencies for Pope County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pope County HospitalGlacial Ridge Hospital – EMS155.3550167.9 PLFMNKVF494
Pope County HospitalGlacial Ridge Hospital158.8425
In 156.0075
107.2 PLFMNKVF494

Pope County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Pope County FireCounty Fire Dispatch2610665faD
Pope County FireVHF Paging Patch 154.31026122660aD
Pope County EMSCounty EMS2610765fbD

Radio system sites in Pope County

Program the control channel first; your scanner finds the voice channels from it.

Glenwood · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 6 (hex 6) · NAC 409
Control 851.4125, 852.9125
Voice 851.9125, 852.4125, 853.4125, 859.2125
Terrace · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 16 (hex 10) · NAC 407
Control 851.9625, 852.9625
Voice 851.4625, 852.4625, 853.4625, 858.2125
Starbuck · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 82 (hex 52)
Control 851.3875, 855.7375
Voice 851.8, 852.1, 853.125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pope County

Common questions

What frequency does the fire department use in Pope County?

Fire dispatch channels listed for Pope County: Pope County Fire 154.3100 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Pope County?

EMS dispatch channels listed for Pope County: Pope County EMS 158.7600 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Pope County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pope County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pope County?

For Pope County, start with the Glenwood site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4125, 852.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pope County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Pope County are marked encrypted.

Are Pope County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Pope County are marked encrypted.