About Minnewaska Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Minnewaska: Pope County Fire 154.3100 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Minnewaska: Pope County EMS 158.7600 MHz, narrow FM, 167.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Pope County Fire talkgroup 26106 (hex 65fa).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Minnewaska, start with the Glenwood site of Allied Radio Matrix for Emergency Response (ARMER), about 4 miles away. Its control channels: 851.4125, 852.9125 MHz.
Data updated .
Pope County channels that also cover Minnewaska
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pope County Fire | Pope County Fire – Paging | 154.3100 In 150.9950 | 123.0 PL | FMN | WNJZ912 |
| Pope County Fire | Pope County Fire – Dispatch | 155.4150 In 153.8600 | 167.9 PL | FMN | WPFZ367 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pope County EMS | Glacial Ridge Hospital – EMS Dispatch | 158.7600 In 151.3550 | 167.9 PL | FMN | KVF494 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pope County Hospital | Glacial Ridge Hospital – EMS | 155.3550 | 167.9 PL | FMN | KVF494 |
| Pope County Hospital | Glacial Ridge Hospital | 158.8425 In 156.0075 | 107.2 PL | FMN | KVF494 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pope County Fire | County Fire Dispatch | 26106 | 65fa | D |
| Pope County Fire | VHF Paging Patch 154.310 | 26122 | 660a | D |
| Pope County EMS | County EMS | 26107 | 65fb | D |
Nearest trunked radio sites
Distances are measured from the center of Minnewaska.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Minnewaska?
We do not have a fire dispatch channel listed specifically for Minnewaska. The county-level fire dispatch channels in the same county: Pope County Fire 154.3100 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Minnewaska?
We do not have a EMS dispatch channel listed specifically for Minnewaska. The county-level EMS dispatch channels in the same county: Pope County EMS 158.7600 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Minnewaska?
Yes. The county-level systems that cover Minnewaska are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Minnewaska?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Minnewaska?
For Minnewaska, start with the Glenwood site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4125, 852.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.