Skip to content

Rice County Fire and EMS Frequencies

Rice County in Minnesota has 6 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 18 cities and communities below for local fire departments and EMS agencies.

About Rice County Fire and EMS Frequencies

Quick answer: Fire dispatch for Rice County: Rice County Fire 151.2800 MHz, narrow FM, 466 DPL. EMS dispatch for Rice County: Rice County EMS 155.3850 MHz, narrow FM, 85.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Rice County Fire talkgroup 22621 (hex 585d).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rice County, start with the Lonsdale site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.375, 851.975, 852.3 MHz.

Data updated .

Rice County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Rice County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rice County FireLonsdale Fire – Paging-Backup151.2800466 DPLFMN—
Rice County FireMorristown Fire – Paging-Backup151.2800423 DPLFMN—
Rice County FireNorthfield Fire – Paging-Backup151.2800413 DPLFMN—
Rice County FireRice County Fire – Paging154.1600
In 151.0850
136.5 PLFMNWQDX262

EMS Dispatch

EMS Dispatch frequencies for Rice County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rice County EMSDistrict One Hospital Regional EMS155.385085.4 PLFMNKVF461

Hospitals & Medical

Hospitals & Medical frequencies for Rice County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rice County HospitalDistrict One Hospital155.3850103.5 PLFMNKVF461

Rice County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Rice County FireCounty Fire Main22621585dD
Rice County FireRice Fire Tactical22637586dD
Rice County FireRice Fire Tactical22638586eD
Rice County FireRice County Fire Operations226405870D
Rice County FireRice County Fire Operations226415871D
Rice County FireFairbault Fire22622585eD

Radio system sites in Rice County

Program the control channel first; your scanner finds the voice channels from it.

Lonsdale · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 9 (hex 9)
Control 851.375, 851.975, 852.3
Voice 852.55, 852.875, 853.675
Faribault - Prison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 35 (hex 23)
Control 858.4375, 859.9375
Voice 856.2375, 856.9375
Rice Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 44 (hex 2C)
Control 851.8, 851.975
Voice 851.1, 852.15, 852.3, 852.4, 852.55, 852.65, 852.875, 853.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Rice County

Common questions

What frequency does the fire department use in Rice County?

Fire dispatch channels listed for Rice County: Rice County Fire 151.2800 MHz, narrow FM, 466 DPL.

What frequency does EMS or the ambulance service use in Rice County?

EMS dispatch channels listed for Rice County: Rice County EMS 155.3850 MHz, narrow FM, 85.4 PL.

Do fire departments and EMS use a trunked radio system in Rice County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Rice County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rice County?

For Rice County, start with the Lonsdale site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.375, 851.975, 852.3 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Rice County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Rice County are marked encrypted.

Are Rice County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Rice County are marked encrypted.