Skip to content

Erin Fire and EMS Frequencies

We do not have frequencies listed specifically for Erin in Rice County, Minnesota yet. Countywide channels for Rice County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rice Co. - Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 8 miles away.

About Erin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Erin: Rice County Fire 151.2800 MHz, narrow FM, 466 DPL. County-level ems dispatch that covers Erin: Rice County EMS 155.3850 MHz, narrow FM, 85.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Rice County Fire talkgroup 22621 (hex 585d).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Erin, start with the Rice Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 8 miles away. Its control channels: 851.8, 851.975 MHz.

Data updated .

Rice County channels that also cover Erin

Fire Dispatch

Fire Dispatch frequencies for Rice County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rice County FireLonsdale Fire – Paging-Backup151.2800466 DPLFMN—
Rice County FireMorristown Fire – Paging-Backup151.2800423 DPLFMN—
Rice County FireNorthfield Fire – Paging-Backup151.2800413 DPLFMN—
Rice County FireRice County Fire – Paging154.1600
In 151.0850
136.5 PLFMNWQDX262

EMS Dispatch

EMS Dispatch frequencies for Rice County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rice County EMSDistrict One Hospital Regional EMS155.385085.4 PLFMNKVF461

Hospitals & Medical

Hospitals & Medical frequencies for Rice County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rice County HospitalDistrict One Hospital155.3850103.5 PLFMNKVF461

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Rice County FireCounty Fire Main22621585dD
Rice County FireRice Fire Tactical22637586dD
Rice County FireRice Fire Tactical22638586eD
Rice County FireRice County Fire Operations226405870D
Rice County FireRice County Fire Operations226415871D
Rice County FireFairbault Fire22622585eD

Nearest trunked radio sites

Distances are measured from the center of Erin.

Rice Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 44 (hex 2C) · about 8 mi away
Control 851.8, 851.975
Voice 851.1, 852.15, 852.3, 852.4, 852.55, 852.65, 852.875, 853.675
Lonsdale · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 9 (hex 9) · about 9 mi away
Control 851.375, 851.975, 852.3
Voice 852.55, 852.875, 853.675
LeCenter · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 32 (hex 20) · about 11 mi away
Voice 851.825, 852.175, 852.375, 852.85, 853.5
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Erin?

We do not have a fire dispatch channel listed specifically for Erin. The county-level fire dispatch channels in the same county: Rice County Fire 151.2800 MHz, narrow FM, 466 DPL.

What frequency does EMS or the ambulance service use in Erin?

We do not have a EMS dispatch channel listed specifically for Erin. The county-level EMS dispatch channels in the same county: Rice County EMS 155.3850 MHz, narrow FM, 85.4 PL.

Do fire departments and EMS use a trunked radio system in Erin?

Yes. The county-level systems that cover Erin are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Erin?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Erin?

For Erin, start with the Rice Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.8, 851.975 MHz. Program a control channel first; the scanner finds the voice channels from it.