About Roseau County Fire and EMS Frequencies
Quick answer: Fire dispatch for Roseau County: Roseau County Fire 154.3550 MHz, narrow FM, 114.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Roseau County Fire talkgroup 50907 (hex c6db).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Roseau County, start with the Greenbush site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.9125, 853.2625 MHz.
Data updated .
Roseau County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Roseau County Fire | County Fire | 154.3550 | 114.8 PL | FMN | WNPU314 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Roseau County Hospital | Roseau Area Hospital | 155.3250 | 103.5 PL | FMN | WPJV915 |
Roseau County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Roseau County Fire | County Fire Main | 50907 | c6db | D |
| Roseau County EMS | County EMS | 50906 | c6da | D |
Radio system sites in Roseau County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Roseau County
- Badger
- Barnett
- Barto
- Beaver
- Cedarbend
- Deer
- Dewey
- Dieter
- Enstrom
- Falun
- Golden Valley
- Greenbush
- Grimstad
- Hereim
- Huss
- Jadis
- Lake
- Laona
- Lind
- Malung
- Mickinock
- Moose
- Moranville
- Nereson
- Palmville
- Pohlitz
- Polonia
- Poplar Grove
- Reine
- Roosevelt
- Roseau
- Ross
- Skagen
- Soler
- Spruce
- Stafford
- Stokes
- Strathcona
- Warroad
Common questions
What frequency does the fire department use in Roseau County?
Fire dispatch channels listed for Roseau County: Roseau County Fire 154.3550 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Roseau County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Roseau County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Roseau County?
For Roseau County, start with the Greenbush site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.9125, 853.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Roseau County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Roseau County are marked encrypted.
Are Roseau County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Roseau County are marked encrypted.