Skip to content

Sherburne County Fire and EMS Frequencies

Sherburne County in Minnesota has 1 countywide conventional frequency and 2 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Sherburne County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sherburne County: Sherburne County Fire 154.1750 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Sherburne County Fire talkgroup 25152 (hex 6240).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sherburne County, start with the St. Cloud - Prison site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 856.2375, 857.2375 MHz.

Data updated .

Sherburne County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sherburne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sherburne County FireSherburne County Fire – Paging154.1750CSQFMNWRA263

Sherburne County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Sherburne County FireCounty Fire – Dispatch251526240D
Sherburne County FireBaldwin Twp Fire251606248D

Radio system sites in Sherburne County

Program the control channel first; your scanner finds the voice channels from it.

St. Cloud - Prison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 29 (hex 1D)
Control 856.2375, 857.2375
Voice 858.7375, 859.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sherburne County

Common questions

What frequency does the fire department use in Sherburne County?

Fire dispatch channels listed for Sherburne County: Sherburne County Fire 154.1750 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Sherburne County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Sherburne County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Sherburne County?

For Sherburne County, start with the St. Cloud - Prison site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.2375, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sherburne County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Sherburne County are marked encrypted.

Are Sherburne County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Sherburne County are marked encrypted.