Skip to content

Elk River Fire and EMS Frequencies

Elk River in Sherburne County, Minnesota has 0 conventional frequencies and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Sherburne - Wright Co. Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 9 miles away.

About Elk River Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elk River: Sherburne County Fire 154.1750 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Elk River Fire talkgroup 25116 (hex 621c).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups; Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elk River, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 851.475, 851.85 MHz.

Data updated .

Elk River trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Elk River FireElk River Fire Tactical25116621cD
Elk River FireElk River Fire Department251286228D

Sherburne County channels that also cover Elk River

Fire Dispatch

Fire Dispatch frequencies for Sherburne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sherburne County FireSherburne County Fire – Paging154.1750CSQFMNWRA263

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Sherburne County FireCounty Fire – Dispatch251526240D
Sherburne County FireBaldwin Twp Fire251606248D

Nearest trunked radio sites

Distances are measured from the center of Elk River.

Sherburne - Wright Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 40 (hex 28) · NAC 40F · about 9 mi away
Control 851.475, 851.85
Voice 851.175, 851.275, 851.575, 852.325, 852.775, 852.9, 853.175, 853.575, 858.3625
Anoka Co Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 2 (hex 2) · NAC 402 · about 15 mi away
Control 851.9375, 852.3875, 852.8875, 853.3875
Voice 851.1375, 851.3125, 851.3875, 851.6875, 852.0625, 852.2125, 852.8125, 853.0875, 853.1375, 853.6875, 853.9125
Hennepin Co. West Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 2 (hex 2) · NAC 40E · about 20 mi away
Control 852.2625, 852.6125, 853.6375, 853.8875
Voice 851.4125, 851.9125, 851.9625, 852.4125, 852.8625, 852.9125, 853.4125, 854.4125, 856.7125, 857.7125, 858.2125, 859.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elk River?

We do not have a fire dispatch channel listed specifically for Elk River. The county-level fire dispatch channels in the same county: Sherburne County Fire 154.1750 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Elk River?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Elk River?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Elk River?

For Elk River, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.475, 851.85 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Elk River fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Elk River are marked encrypted.