About Somerset Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Somerset: Steele County Fire 150.9950 MHz, narrow FM, 136.5 PL. County-level ems dispatch that covers Somerset: Steele County EMS 155.2800 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Steele County Fire talkgroup 22416 (hex 5790).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Somerset, start with the Dodge - Steele Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 854.6375, 858.9375 MHz.
Data updated .
Steele County channels that also cover Somerset
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steele County Fire | Fire Paging-Ellendale | 150.9950 In 159.0450 | 136.5 PL | FMN | WQVZ793 |
| Steele County Fire | Fire Paging-Blooming Prairie | 154.0400 In 158.8800 | 136.5 PL | FMN | WQVZ793 |
| Steele County Fire | Fire Paging-Owatonna | 154.1750 In 153.7700 | 136.5 PL | FMN | WQVZ793 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steele County EMS | Gold Cross EMS | 155.2800 | 136.5 PL | FMN | WNMP639 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steele County Hospital | Owatonna Hospital | 155.3850 | 131.8 PL | FMN | KIG600 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Steele County Fire | Steele Co Fire Main | 22416 | 5790 | D |
Nearest trunked radio sites
Distances are measured from the center of Somerset.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Somerset?
We do not have a fire dispatch channel listed specifically for Somerset. The county-level fire dispatch channels in the same county: Steele County Fire 150.9950 MHz, narrow FM, 136.5 PL.
What frequency does EMS or the ambulance service use in Somerset?
We do not have a EMS dispatch channel listed specifically for Somerset. The county-level EMS dispatch channels in the same county: Steele County EMS 155.2800 MHz, narrow FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Somerset?
Yes. The county-level systems that cover Somerset are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Somerset?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Somerset?
For Somerset, start with the Dodge - Steele Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.6375, 858.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.