Skip to content

Meriden Fire and EMS Frequencies

We do not have frequencies listed specifically for Meriden in Steele County, Minnesota yet. Countywide channels for Steele County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Waseca (Allied Radio Matrix for Emergency Response (ARMER)), about 9 miles away.

About Meriden Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Meriden: Steele County Fire 150.9950 MHz, narrow FM, 136.5 PL. County-level ems dispatch that covers Meriden: Steele County EMS 155.2800 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Steele County Fire talkgroup 22416 (hex 5790).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Meriden, start with the Waseca site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 851.9375, 853.3875, 854.4625 MHz.

Data updated .

Steele County channels that also cover Meriden

Fire Dispatch

Fire Dispatch frequencies for Steele County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Steele County FireFire Paging-Ellendale150.9950
In 159.0450
136.5 PLFMNWQVZ793
Steele County FireFire Paging-Blooming Prairie154.0400
In 158.8800
136.5 PLFMNWQVZ793
Steele County FireFire Paging-Owatonna154.1750
In 153.7700
136.5 PLFMNWQVZ793

EMS Dispatch

EMS Dispatch frequencies for Steele County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Steele County EMSGold Cross EMS155.2800136.5 PLFMNWNMP639

Hospitals & Medical

Hospitals & Medical frequencies for Steele County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Steele County HospitalOwatonna Hospital155.3850131.8 PLFMNKIG600

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Steele County FireSteele Co Fire Main224165790D

Nearest trunked radio sites

Distances are measured from the center of Meriden.

Waseca · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 11 (hex B) · about 9 mi away
Control 851.9375, 853.3875, 854.4625
Voice 851.575, 852.175, 852.325, 852.95, 854.0875
New Richland · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 4 (hex 4) · about 14 mi away
Control 854.2875
Voice 854.5375, 854.6875, 857.4625, 858.7375, 859.7375
Dodge - Steele Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 25 (hex 19) · about 14 mi away
Control 854.6375, 858.9375
Voice 851.4, 851.875, 852.375, 853.05, 853.55, 853.85, 854.1125, 854.3875, 856.0125, 857.0375, 857.9375, 859.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Meriden?

We do not have a fire dispatch channel listed specifically for Meriden. The county-level fire dispatch channels in the same county: Steele County Fire 150.9950 MHz, narrow FM, 136.5 PL.

What frequency does EMS or the ambulance service use in Meriden?

We do not have a EMS dispatch channel listed specifically for Meriden. The county-level EMS dispatch channels in the same county: Steele County EMS 155.2800 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Meriden?

Yes. The county-level systems that cover Meriden are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Meriden?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Meriden?

For Meriden, start with the Waseca site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9375, 853.3875, 854.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.