About Woodville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Woodville: Waseca County Fire 154.4300 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Waseca County Fire talkgroup 34618 (hex 873a).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Woodville, start with the Waseca site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 851.9375, 853.3875, 854.4625 MHz.
Data updated .
Waseca County channels that also cover Woodville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Waseca County Fire | PAGE | 154.4300 | CSQ | FMN | KVD603 |
| Waseca County Fire | Fire Paging | 158.7600 In 153.8900 | 136.5 PL | FMN | KVD603 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Waseca County Fire | Fire/EMS Dispatch | 34618 | 873a | D |
| Waseca County Hospital | Waseca Hospital | 34626 | 8742 | D |
Nearest trunked radio sites
Distances are measured from the center of Woodville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Woodville?
We do not have a fire dispatch channel listed specifically for Woodville. The county-level fire dispatch channels in the same county: Waseca County Fire 154.4300 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Woodville?
Yes. The county-level systems that cover Woodville are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Woodville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Woodville?
For Woodville, start with the Waseca site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9375, 853.3875, 854.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.