Skip to content

Iosco Fire and EMS Frequencies

We do not have frequencies listed specifically for Iosco in Waseca County, Minnesota yet. Countywide channels for Waseca County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Waseca (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Iosco Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Iosco: Waseca County Fire 154.4300 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Waseca County Fire talkgroup 34618 (hex 873a).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Iosco, start with the Waseca site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 851.9375, 853.3875, 854.4625 MHz.

Data updated .

Waseca County channels that also cover Iosco

Fire Dispatch

Fire Dispatch frequencies for Waseca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Waseca County FirePAGE154.4300CSQFMNKVD603
Waseca County FireFire Paging158.7600
In 153.8900
136.5 PLFMNKVD603

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Waseca County FireFire/EMS Dispatch34618873aD
Waseca County HospitalWaseca Hospital346268742D

Nearest trunked radio sites

Distances are measured from the center of Iosco.

Waseca · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 11 (hex B) · about 6 mi away
Control 851.9375, 853.3875, 854.4625
Voice 851.575, 852.175, 852.325, 852.95, 854.0875
Janesville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 31 (hex 1F) · about 7 mi away
Control 851.75
Voice 851.4125, 852.3875, 852.8875, 853.4125, 853.9125, 857.4375
Waterville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 20 (hex 14) · about 8 mi away
Control 852.35
Voice 851.45, 851.9, 852.2, 853.175, 853.475, 853.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Iosco?

We do not have a fire dispatch channel listed specifically for Iosco. The county-level fire dispatch channels in the same county: Waseca County Fire 154.4300 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Iosco?

Yes. The county-level systems that cover Iosco are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Iosco?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Iosco?

For Iosco, start with the Waseca site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9375, 853.3875, 854.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.