Skip to content

Bertha Fire and EMS Frequencies

Bertha in Todd County, Minnesota has 0 conventional frequencies and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Hewitt (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Bertha Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bertha: Todd County Fire 154.2650 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Bertha Fire talkgroup 26913 (hex 6921).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups; Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bertha, start with the Hewitt site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.425, 857.4375 MHz.

Data updated .

Bertha trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Bertha FireBertha Fire269136921D
Bertha EMSBertha Ambulance Administration26923692bD

Todd County channels that also cover Bertha

Fire Dispatch

Fire Dispatch frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County FirePaging X154.2650CSQFMNWNZL398

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County FireCounty Fire – EMS Tactical155.0850156.7 PLFMNKJB954

Hospitals & Medical

Hospitals & Medical frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County HospitalLong Prairie Memorial Hospital155.3850156.7 PLFMNKVP726
Todd County HospitalLakewood Health Systems – Staples155.3850114.8 PLFMNWPKX763

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Todd County FireTodd County Fire – Dispatch26908691cD
Todd County FireAnnounce269286930D

Nearest trunked radio sites

Distances are measured from the center of Bertha.

Hewitt · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 97 (hex 61) · NAC 405 · about 7 mi away
Control 851.425, 857.4375
Voice 851.1125, 851.875, 856.4375, 856.9875
Aldrich · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 99 (hex 63) · NAC 407 · about 14 mi away
Control 852.9375, 853.4375
Voice 851.475, 852.4375, 855.7375
Parkers Prairie · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 93 (hex 5D) · about 18 mi away
Control 851.9, 859.9875
Voice 852.275, 852.4875, 853.425, 857.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bertha?

We do not have a fire dispatch channel listed specifically for Bertha. The county-level fire dispatch channels in the same county: Todd County Fire 154.2650 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Bertha?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bertha?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bertha?

For Bertha, start with the Hewitt site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.425, 857.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bertha fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Bertha are marked encrypted.