About Eagle Bend Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Eagle Bend: Todd County Fire 154.2650 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Eagle Bend Fire talkgroup 26915 (hex 6923).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Eagle Bend, start with the Long Prairie site of Allied Radio Matrix for Emergency Response (ARMER), about 13 miles away. Its control channels: 857.7375, 858.7375 MHz.
Data updated .
Eagle Bend trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Eagle Bend Fire | Eagle Bend Fire | 26915 | 6923 | D |
Todd County channels that also cover Eagle Bend
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County Fire | Paging X | 154.2650 | CSQ | FMN | WNZL398 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County Fire | County Fire – EMS Tactical | 155.0850 | 156.7 PL | FMN | KJB954 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County Hospital | Long Prairie Memorial Hospital | 155.3850 | 156.7 PL | FMN | KVP726 |
| Todd County Hospital | Lakewood Health Systems – Staples | 155.3850 | 114.8 PL | FMN | WPKX763 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Todd County Fire | Todd County Fire – Dispatch | 26908 | 691c | D |
| Todd County Fire | Announce | 26928 | 6930 | D |
Nearest trunked radio sites
Distances are measured from the center of Eagle Bend.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Eagle Bend?
We do not have a fire dispatch channel listed specifically for Eagle Bend. The county-level fire dispatch channels in the same county: Todd County Fire 154.2650 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Eagle Bend?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Eagle Bend?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Eagle Bend?
For Eagle Bend, start with the Long Prairie site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.7375, 858.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Eagle Bend fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Eagle Bend are marked encrypted.