Skip to content

Wabasha County Fire and EMS Frequencies

Wabasha County in Minnesota has 8 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 22 cities and communities below for local fire departments and EMS agencies.

About Wabasha County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wabasha County: Wabasha County Fire 154.2800 MHz, narrow FM, 100.0 PL. EMS dispatch for Wabasha County: Medical Facilities 163.2500 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wabasha County Fire talkgroup 21248 (hex 5300).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wabasha County, start with the Wabasha Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 854.6625, 856.2125 MHz.

Data updated .

Wabasha County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wabasha County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wabasha County FireWabasha County Fire – West154.2800
In 153.7700
100.0 PLFMNKCP519
Wabasha County FireWabasha County Fire – Countywide154.2800
In 154.0100
110.9 PLFMNKCP519
Wabasha County FireWabasha County Fire – North154.2800
In 153.7700
71.9 PLFMNKCP519
Wabasha County FireWabasha County Fire – East154.2800
In 153.7700
103.5 PLFMNKCP519
Wabasha County FireWabasha County Fire – South154.2800
In 153.7700
103.5 PLFMNKCP519

EMS Dispatch

EMS Dispatch frequencies for Wabasha County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical FacilitiesLake City Hosp. (Mayo)-Paging163.2500FMNKUN637

Hospitals & Medical

Hospitals & Medical frequencies for Wabasha County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical FacilitiesLake City Hosp. (Mayo)-Lake City Ambulance155.3850FMNKUN637
Medical FacilitiesSt. Elizabeth's Medical Center155.3850123.0 PLFMNKNHE626

Wabasha County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Wabasha County FireFire/EMS Main212485300D
Wabasha County FireFire/EMS Page212495301D

Radio system sites in Wabasha County

Program the control channel first; your scanner finds the voice channels from it.

Wabasha Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 42 (hex 2A)
Control 854.6625, 856.2125
Voice 851.3875, 851.85, 852.4125, 853.9125, 857.2125, 858.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wabasha County

Common questions

What frequency does the fire department use in Wabasha County?

Fire dispatch channels listed for Wabasha County: Wabasha County Fire 154.2800 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Wabasha County?

EMS dispatch channels listed for Wabasha County: Medical Facilities 163.2500 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Wabasha County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wabasha County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wabasha County?

For Wabasha County, start with the Wabasha Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.6625, 856.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wabasha County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Wabasha County are marked encrypted.

Are Wabasha County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Wabasha County are marked encrypted.