About Gillford Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Gillford: Wabasha County Fire 154.2800 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Gillford: Medical Facilities 163.2500 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wabasha County Fire talkgroup 21248 (hex 5300).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gillford, start with the Wabasha Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 854.6625, 856.2125 MHz.
Data updated .
Wabasha County channels that also cover Gillford
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wabasha County Fire | Wabasha County Fire – West | 154.2800 In 153.7700 | 100.0 PL | FMN | KCP519 |
| Wabasha County Fire | Wabasha County Fire – Countywide | 154.2800 In 154.0100 | 110.9 PL | FMN | KCP519 |
| Wabasha County Fire | Wabasha County Fire – North | 154.2800 In 153.7700 | 71.9 PL | FMN | KCP519 |
| Wabasha County Fire | Wabasha County Fire – East | 154.2800 In 153.7700 | 103.5 PL | FMN | KCP519 |
| Wabasha County Fire | Wabasha County Fire – South | 154.2800 In 153.7700 | 103.5 PL | FMN | KCP519 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Medical Facilities | Lake City Hosp. (Mayo)-Paging | 163.2500 | FMN | KUN637 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Medical Facilities | Lake City Hosp. (Mayo)-Lake City Ambulance | 155.3850 | FMN | KUN637 | |
| Medical Facilities | St. Elizabeth's Medical Center | 155.3850 | 123.0 PL | FMN | KNHE626 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wabasha County Fire | Fire/EMS Main | 21248 | 5300 | D |
| Wabasha County Fire | Fire/EMS Page | 21249 | 5301 | D |
Nearest trunked radio sites
Distances are measured from the center of Gillford.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Gillford?
We do not have a fire dispatch channel listed specifically for Gillford. The county-level fire dispatch channels in the same county: Wabasha County Fire 154.2800 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in Gillford?
We do not have a EMS dispatch channel listed specifically for Gillford. The county-level EMS dispatch channels in the same county: Medical Facilities 163.2500 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Gillford?
Yes. The county-level systems that cover Gillford are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gillford?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gillford?
For Gillford, start with the Wabasha Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.6625, 856.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.