About Roberts Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Roberts: Wilkin County Fire 154.4150 MHz, narrow FM, 110.9 PL. County-level ems dispatch that covers Roberts: Wilkin County EMS 155.6175 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wilkin County Fire talkgroup 27701 (hex 6c35).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Roberts, start with the Comstock site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 852.4875, 855.9875 MHz.
Data updated .
Wilkin County channels that also cover Roberts
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilkin County Fire | County Fire Paging – Patch | 154.4150 In 150.7900 | 110.9 PL | FMN | WPYM765 |
| Wilkin County Fire | Foxhome Fire Paging | 154.4300 | 107.2 PL | FMN | WQCP502 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilkin County Fire | Breckenridge Fire | 154.3850 | 110.9 PL | FMN | WPMY682 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilkin County EMS | ASI EMS | 155.6175 | FMN | WQVL562 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilkin County Hospital | St. Francis Hospital | 155.3550 | 186.2 PL | FMN | WQDV418 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wilkin County Fire | Fire EMS Dispatch | 27701 | 6c35 | D |
Nearest trunked radio sites
Distances are measured from the center of Roberts.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Roberts?
We do not have a fire dispatch channel listed specifically for Roberts. The county-level fire dispatch channels in the same county: Wilkin County Fire 154.4150 MHz, narrow FM, 110.9 PL.
What frequency does EMS or the ambulance service use in Roberts?
We do not have a EMS dispatch channel listed specifically for Roberts. The county-level EMS dispatch channels in the same county: Wilkin County EMS 155.6175 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Roberts?
Yes. The county-level systems that cover Roberts are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Roberts?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Roberts?
For Roberts, start with the Comstock site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4875, 855.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.