About Benndale Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Benndale: George County Fire 155.1450 MHz, narrow FM, 136.5 PL. County-level ems dispatch that covers Benndale: George County EMS 151.0400 MHz, narrow FM, 123.0 PL. Trunked: Mississippi Wireless Information Network (MSWIN), for example George County EMS talkgroup 31855 (hex 7c6f).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Benndale, start with the Benndale site of Mississippi Wireless Information Network (MSWIN), about 1 miles away. Its control channels: 774.08125, 774.33125, 774.58125 MHz.
Data updated .
George County channels that also cover Benndale
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| George County Fire | George County Fire – Dispatch | 155.1450 In 153.8300 | 136.5 PL | FMN | WPAU862 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| George County Fire | Volunteer Fire Department Talkaround | 154.4450 In 153.9800 | 136.5 PL | FMN | WPAU862 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| George County EMS | George County EMS – Dispatch | 151.0400 In 159.0600 | 123.0 PL | FMN | WPMQ782 |
| George County EMS | Civil Defense EMS Net | 155.2650 | FMN | KUG668 |
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| George County EMS | George County EMS – Dispatch | 31855 | 7c6f | T |
Nearest trunked radio sites
Distances are measured from the center of Benndale.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Benndale?
We do not have a fire dispatch channel listed specifically for Benndale. The county-level fire dispatch channels in the same county: George County Fire 155.1450 MHz, narrow FM, 136.5 PL.
What frequency does EMS or the ambulance service use in Benndale?
We do not have a EMS dispatch channel listed specifically for Benndale. The county-level EMS dispatch channels in the same county: George County EMS 151.0400 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Benndale?
Yes. The county-level systems that cover Benndale are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Benndale?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Benndale?
For Benndale, start with the Benndale site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.08125, 774.33125, 774.58125, 774.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.