About Bond Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bond: Stone County Fire 154.1900 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Bond: AAA Ambulance Service 155.6475 MHz, narrow FM, 612 DPL; Stone County EMS 154.1150 MHz, narrow FM, no tone. Trunked: Mississippi Wireless Information Network (MSWIN), for example Stone County Fire talkgroup 36772 (hex 8fa4).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bond, start with the Brooklyn site of Mississippi Wireless Information Network (MSWIN), about 9 miles away. Its control channels: 856.3125, 857.3625 MHz.
Data updated .
Stone County channels that also cover Bond
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stone County Fire | Stone County Fire Protection District Dispatch | 154.1900 | 107.2 PL | FMN | WQBS939 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stone County Fire | Stone County Fire Protection District Tactical | 154.1600 | FMN | WQBS939 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| AAA Ambulance Service | Dispatch Wiggins | 155.6475 In 153.8975 | 612 DPL | FMN | KYO214 |
| Stone County EMS | Stone County Hospital Ambulance Dispatch | 154.1150 | FMN | WPUJ911 |
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Stone County Fire | County Fire – Primary | 36772 | 8fa4 | T |
| Stone County Fire | County Fire – Fireground | 36773 | 8fa5 | T |
Nearest trunked radio sites
Distances are measured from the center of Bond.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bond?
We do not have a fire dispatch channel listed specifically for Bond. The county-level fire dispatch channels in the same county: Stone County Fire 154.1900 MHz, narrow FM, 107.2 PL.
What frequency does EMS or the ambulance service use in Bond?
We do not have a EMS dispatch channel listed specifically for Bond. The county-level EMS dispatch channels in the same county: AAA Ambulance Service 155.6475 MHz, narrow FM, 612 DPL; Stone County EMS 154.1150 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Bond?
Yes. The county-level systems that cover Bond are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bond?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bond?
For Bond, start with the Brooklyn site of Mississippi Wireless Information Network (MSWIN). Its control channels are 856.3125, 857.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.