About Standing Pine Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Standing Pine: Leake County Fire 154.3700 MHz, narrow FM, 123.0 PL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 7 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Leake County channels that also cover Standing Pine
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Leake County Fire | Fire/Rescue Operations | 154.3700 In 153.9500 | 123.0 PL | FMN | WNXQ816 |
| Leake County Fire | County Volunteer Fire Department – Dispatch | 154.3700 In 153.9500 | RAN 003 | NXDN48 | WNXQ816 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Leake County Fire | County Volunteer Fire Department – Fireground | 154.2650 | RAN 003 | NXDN48 | — |
| Leake County Fire | County Volunteer Fire Department – Fireground | 154.2800 | RAN 003 | NXDN48 | — |
| Leake County Fire | County Search & Rescue | 154.2950 | RAN 003 | NXDN48 | — |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Leake County Fire | Thomastown Volunteer Fire Department | 151.0250 In 155.8800 | RAN 003 | NXDN48 | WSHD593 |
| Leake County Fire | Lena Volunteer Fire Department | 155.9475 In 158.9925 | RAN 003 | NXDN48 | WQYK638 |
| Leake County Fire | Barnes Volunteer Fire Department | 156.1650 In 153.9725 | RAN 003 | NXDN48 | WSHD593 |
Nearest trunked radio sites
Distances are measured from the center of Standing Pine.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Standing Pine?
We do not have a fire dispatch channel listed specifically for Standing Pine. The county-level fire dispatch channels in the same county: Leake County Fire 154.3700 MHz, narrow FM, 123.0 PL.
What scanner do I need to listen to fire and EMS in Standing Pine?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Standing Pine?
For Standing Pine, start with the Walnut Grove site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.33125, 774.58125, 774.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.