About Harperville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Harperville: Scott County Fire 154.8600 MHz, narrow FM, 110.9 PL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Scott County Fire talkgroup 46936 (hex b758).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Harperville, start with the Walnut Grove site of Mississippi Wireless Information Network (MSWIN), about 11 miles away. Its control channels: 774.33125, 774.58125, 774.83125 MHz.
Data updated .
Scott County channels that also cover Harperville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire | County Fire/EMS Dispatch | 154.8600 In 158.9400 | 110.9 PL | FMN | WQDH373 |
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Scott County Fire | County Fire & EMS – Dispatch | 46936 | b758 | T |
| Scott County Fire | County Fire – Fireground | 46937 | b759 | T |
| Scott County Fire | County Fire – Fireground | 46938 | b75a | T |
| Scott County Fire | Homewood Volunteer Fire Department | 46940 | b75c | T |
| Scott County Fire | Liberty Volunteer Fire Department | 46941 | b75d | T |
| Scott County Fire | North Central Volunteer Fire Department | 46942 | b75e | T |
| Scott County Fire | Lake Volunteer Fire Department | 46944 | b760 | T |
| Scott County Fire | Ludlow Volunteer Fire Department | 46945 | b761 | T |
Nearest trunked radio sites
Distances are measured from the center of Harperville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Harperville?
We do not have a fire dispatch channel listed specifically for Harperville. The county-level fire dispatch channels in the same county: Scott County Fire 154.8600 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Harperville?
Yes. The county-level systems that cover Harperville are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Harperville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Harperville?
For Harperville, start with the Walnut Grove site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.33125, 774.58125, 774.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.