Skip to content

Great Falls Fire and EMS Frequencies

Great Falls in Cascade County, Montana has 4 conventional frequencies and 8 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Smelter Hill (Montana Public Safety Communications System), about 3 miles away.

About Great Falls Fire and EMS Frequencies

Quick answer: Fire dispatch for Great Falls: Great Falls Fire 154.3700 MHz, narrow FM, 131.8 PL. EMS dispatch for Great Falls: Great Falls EMS 152.2700 MHz, narrow FM, no tone. Trunked: Montana Public Safety Communications System, for example Great Falls Fire talkgroup 2977 (hex ba1).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Great Falls, start with the Smelter Hill site of Montana Public Safety Communications System, about 3 miles away. Its control channels: 154.89, 164.725 MHz.

Data updated .

Great Falls conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Great Falls
AgencyDescriptionFrequency (MHz)ToneModeFCC
Great Falls FireFire 1 Dispatch154.3700131.8 PLFMNWNHN756

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Great Falls
AgencyDescriptionFrequency (MHz)ToneModeFCC
Great Falls FireFire 3 Tactical154.2350FMNWNHN756
Great Falls FireGreat Falls Fire – Fire Ground154.4150FMNWNHN756

EMS Dispatch

EMS Dispatch frequencies for Great Falls
AgencyDescriptionFrequency (MHz)ToneModeFCC
Great Falls EMSGreat Falls Emergency Services152.2700
In 157.5300
FMNWQIZ698

Great Falls trunked talkgroups

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Great Falls FireGreat Falls Fire – Dispatch2977ba1D
Great Falls FireGreat Falls Fire – Tactical Channel2981ba5D
Great Falls FireGreat Falls Fire – Tactical Channel2985ba9D
Great Falls FireGreat Falls Fire – Tactical Channel2989badD
Great Falls FireGreat Falls Fire – Alternate2979ba3D
Great Falls FireGreat Falls Fire – Alternate2987babD
Great Falls EMSEMS Transport2937b79D
Great Falls EMSEMS Administration2947b83D

Nearest trunked radio sites

Distances are measured from the center of Great Falls.

Smelter Hill · Montana Public Safety Communications System
RFSS 1 · Site 36 (hex 24) · NAC 163 · about 3 mi away
Control 154.89, 164.725
Voice 151.16, 151.355, 153.845
Smelter Hill 800 · Montana Public Safety Communications System
RFSS 1 · Site 38 (hex 26) · NAC 167 · about 3 mi away
Control 851.15, 851.4, 853.0625
Voice 853.5875
Great Falls · Montana Public Safety Communications System
RFSS 1 · Site 37 (hex 25) · NAC 161 · about 3 mi away
Control 153.86, 154.205
Voice 154.34, 155.01, 161.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Great Falls?

Fire dispatch channels listed for Great Falls: Great Falls Fire 154.3700 MHz, narrow FM, 131.8 PL.

What frequency does EMS or the ambulance service use in Great Falls?

EMS dispatch channels listed for Great Falls: Great Falls EMS 152.2700 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Great Falls?

Yes. Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Great Falls?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Great Falls?

For Great Falls, start with the Smelter Hill site of Montana Public Safety Communications System. Its control channels are 154.89, 164.725 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Great Falls fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Great Falls are marked encrypted.

Are Great Falls fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Great Falls are marked encrypted.