Skip to content

Pleasant Valley Colony Fire and EMS Frequencies

We do not have frequencies listed specifically for Pleasant Valley Colony in Cascade County, Montana yet. Countywide channels for Cascade County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Smelter Hill 800 (Montana Public Safety Communications System), about 17 miles away.

About Pleasant Valley Colony Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Pleasant Valley Colony yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Pleasant Valley Colony.

Smelter Hill 800 · Montana Public Safety Communications System
RFSS 1 · Site 38 (hex 26) · NAC 167 · about 17 mi away
Control 851.15, 851.4, 853.0625
Voice 853.5875
Smelter Hill · Montana Public Safety Communications System
RFSS 1 · Site 36 (hex 24) · NAC 163 · about 17 mi away
Control 154.89, 164.725
Voice 151.16, 151.355, 153.845
Gore Hill 800 · Montana Public Safety Communications System
RFSS 1 · Site 40 (hex 28) · NAC 166 · about 17 mi away
Control 851.175, 851.425, 851.8
Voice 853.5
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Pleasant Valley Colony?

For Pleasant Valley Colony, start with the Smelter Hill 800 site of Montana Public Safety Communications System. Its control channels are 851.15, 851.4, 853.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.