Skip to content

Daniels County Fire and EMS Frequencies

Daniels County in Montana has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Daniels County Fire and EMS Frequencies

Quick answer: EMS dispatch for Daniels County: Daniels County EMS 158.2800 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Daniels County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Daniels County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Daniels County EMSDaniels County EMS – Dispatch158.2800FMNKDX848

Radio system sites in Daniels County

Program the control channel first; your scanner finds the voice channels from it.

Scobey · Montana Public Safety Communications System
RFSS 2 · Site 7 (hex 7)
Control 151.325, 161.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Daniels County

Common questions

What frequency does EMS or the ambulance service use in Daniels County?

EMS dispatch channels listed for Daniels County: Daniels County EMS 158.2800 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Daniels County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Daniels County?

For Daniels County, start with the Scobey site of Montana Public Safety Communications System. Its control channels are 151.325, 161.925 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Daniels County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Daniels County are marked encrypted.