Skip to content

Hill County Fire and EMS Frequencies

Hill County in Montana has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 22 cities and communities below for local fire departments and EMS agencies.

About Hill County Fire and EMS Frequencies

Quick answer: Fire dispatch for Hill County: Hill County Fire 154.3550 MHz, narrow FM, 114.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Hill County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hill County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hill County FireHill County Fire – Dispatch154.3550
In 150.7900
114.8 PLFMNWPKW407

EMS Tactical

EMS Tactical frequencies for Hill County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hill County EMSHill County EMS – Tactical Channel155.2800FMNWBL301
Hill County EMSEMS-to-Hospital155.3400FMNWBL301

EMS Talk-around

EMS Talk-around frequencies for Hill County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hill County EMSHill County EMS – Alternate152.0075FMNWBL301

Radio system sites in Hill County

Program the control channel first; your scanner finds the voice channels from it.

Hill County Sheriff Office · Montana Public Safety Communications System
RFSS 1 · Site 19 (hex 13)
Control 151.295, 154.235
Voice 153.995
Boyce Ranch · Montana Public Safety Communications System
RFSS 1 · Site 47 (hex 2F)
Control 151.34, 153.92
Voice 154.415
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Hill County

Common questions

What frequency does the fire department use in Hill County?

Fire dispatch channels listed for Hill County: Hill County Fire 154.3550 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Hill County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hill County?

For Hill County, start with the Hill County Sheriff Office site of Montana Public Safety Communications System. Its control channels are 151.295, 154.235 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hill County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Hill County are marked encrypted.