About Havre Fire and EMS Frequencies
Quick answer: Fire dispatch for Havre: Havre Fire 154.2050 MHz, narrow FM, 114.8 PL. Trunked: Montana Public Safety Communications System, for example Havre Fire talkgroup 6167 (hex 1817).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Havre, start with the Hill County Sheriff Office site of Montana Public Safety Communications System, about 1 miles away. Its control channels: 151.295, 154.235 MHz.
Data updated .
Havre conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Havre Fire | Fire 1 Dispatch | 154.2050 In 158.9550 | 114.8 PL | FMN | WNAJ862 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Havre Fire | Havre Fire – Fire Ground | 154.4450 | 151.4 PL | FMN | WNJV660 |
Havre trunked talkgroups
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Havre Fire | Havre Fire Dispatch | 6167 | 1817 | D |
Hill County channels that also cover Havre
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hill County Fire | Hill County Fire – Dispatch | 154.3550 In 150.7900 | 114.8 PL | FMN | WPKW407 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hill County EMS | Hill County EMS – Tactical Channel | 155.2800 | FMN | WBL301 | |
| Hill County EMS | EMS-to-Hospital | 155.3400 | FMN | WBL301 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hill County EMS | Hill County EMS – Alternate | 152.0075 | FMN | WBL301 |
Nearest trunked radio sites
Distances are measured from the center of Havre.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Havre?
Fire dispatch channels listed for Havre: Havre Fire 154.2050 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Havre?
Yes. Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Havre?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Havre?
For Havre, start with the Hill County Sheriff Office site of Montana Public Safety Communications System. Its control channels are 151.295, 154.235 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Havre fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Havre are marked encrypted.
Are Havre fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Havre are marked encrypted.