Skip to content

Geyser Fire and EMS Frequencies

We do not have frequencies listed specifically for Geyser in Judith Basin County, Montana yet. Countywide channels for Judith Basin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Highwood Baldy (Montana Public Safety Communications System), about 10 miles away.

About Geyser Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Geyser: Hobson Rural Fire District 154.1900 MHz, narrow FM, no tone; Judith Basin Fire District 153.8900 MHz, narrow FM, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Judith Basin County channels that also cover Geyser

Fire Dispatch

Fire Dispatch frequencies for Judith Basin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hobson Rural Fire DistrictHobson Rural Fire District – Dispatch154.1900FMNKNJZ446
Judith Basin Fire DistrictJudith Basin Fire District – Dispatch153.8900FMNWNHS450

Nearest trunked radio sites

Distances are measured from the center of Geyser.

Highwood Baldy · Montana Public Safety Communications System
RFSS 1 · Site 28 (hex 1C) · NAC 165 · about 10 mi away
Control 154.725, 154.98
Voice 155.43, 155.685, 161.9125
Smelter Hill 800 · Montana Public Safety Communications System
RFSS 1 · Site 38 (hex 26) · NAC 167 · about 40 mi away
Control 851.15, 851.4, 853.0625
Voice 853.5875
Smelter Hill · Montana Public Safety Communications System
RFSS 1 · Site 36 (hex 24) · NAC 163 · about 40 mi away
Control 154.89, 164.725
Voice 151.16, 151.355, 153.845
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Geyser?

We do not have a fire dispatch channel listed specifically for Geyser. The county-level fire dispatch channels in the same county: Hobson Rural Fire District 154.1900 MHz, narrow FM, no tone; Judith Basin Fire District 153.8900 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Geyser?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Geyser?

For Geyser, start with the Highwood Baldy site of Montana Public Safety Communications System. Its control channels are 154.725, 154.98 MHz. Program a control channel first; the scanner finds the voice channels from it.