Skip to content

Lewis and Clark County Fire and EMS Frequencies

Lewis and Clark County in Montana has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 18 cities and communities below for local fire departments and EMS agencies.

About Lewis and Clark County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lewis and Clark County: Lewis And Clark County Fire 154.1600 MHz, narrow FM, 203.5 PL. Trunked: Montana Public Safety Communications System, for example Lewis and Clark County Fire talkgroup 87 (hex 57).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lewis and Clark County, start with the Downtown Helena site of Montana Public Safety Communications System. Its control channels: 159.12, 161.875 MHz.

Data updated .

Lewis and Clark County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lewis and Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lewis And Clark County FireLewis And Clark County Fire – Rural Dispatch154.1600
In 158.8050
203.5 PLFMNWNQH392

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lewis and Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wolf Creek/Craig Fire Service AreaOperations154.3250FMNWPRG547

Lewis and Clark County trunked talkgroups

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Lewis and Clark County FireCounty Fire Dispatch8757D
Lewis and Clark County FireCounty Fire Tactical8959D

Radio system sites in Lewis and Clark County

Program the control channel first; your scanner finds the voice channels from it.

Downtown Helena · Montana Public Safety Communications System
RFSS 1 · Site 1 (hex 1) · NAC 161
Control 159.12, 161.875
Voice 159.285, 159.45, 159.465
East Helena · Montana Public Safety Communications System
RFSS 1 · Site 2 (hex 2) · NAC 167
Control 154.355, 156.24
Voice 155.07, 159.465, 161.95
Wirth Ranch · Montana Public Safety Communications System
RFSS 1 · Site 3 (hex 3) · NAC 168
Control 156.105, 156.195
Voice 151.205, 151.355, 153.935, 154.145, 155.715, 158.925
Hogback Mountain · Montana Public Safety Communications System
RFSS 1 · Site 4 (hex 4) · NAC 169
Control 155.61, 159.33
Voice 154.145, 154.4525, 155.31, 161.8875, 161.9, 161.9375
Sunset Mountain · Montana Public Safety Communications System
RFSS 1 · Site 5 (hex 5) · NAC 161
Control 155.355, 161.925
Voice 154.755, 155.19
Belmont Mountain · Montana Public Safety Communications System
RFSS 1 · Site 6 (hex 6) · NAC 16B
Control 155.415, 162
Voice 154.04, 155.85, 161.85
MacDonald Pass · Montana Public Safety Communications System
RFSS 1 · Site 7 (hex 7) · NAC 16C
Control 154.34, 161.975
Voice 154.1, 154.4, 159
Stonewall Mountain · Montana Public Safety Communications System
RFSS 1 · Site 8 (hex 8) · NAC 168
Control 155.745
Voice 154.98, 155.835, 155.88
Nob Hill 700 MHz · Montana Public Safety Communications System
RFSS 1 · Site 25 (hex 19) · NAC 160
Control 769.1875, 770.0625, 771.0375
Voice 772.2125, 772.9875
Helena 700 · Montana Public Safety Communications System
RFSS 1 · Site 56 (hex 38) · NAC 160
Control 769.0875, 769.7625, 770.7625
Voice 771.2125, 772.3375, 772.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lewis and Clark County

Common questions

What frequency does the fire department use in Lewis and Clark County?

Fire dispatch channels listed for Lewis and Clark County: Lewis And Clark County Fire 154.1600 MHz, narrow FM, 203.5 PL.

Do fire departments and EMS use a trunked radio system in Lewis and Clark County?

Yes. Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lewis and Clark County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lewis and Clark County?

For Lewis and Clark County, start with the Downtown Helena site of Montana Public Safety Communications System. Its control channels are 159.12, 161.875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lewis and Clark County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Lewis and Clark County are marked encrypted.

Are Lewis and Clark County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Lewis and Clark County are marked encrypted.