About Unionville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Unionville: Lewis And Clark County Fire 154.1600 MHz, narrow FM, 203.5 PL. Trunked: Montana Public Safety Communications System, for example Lewis and Clark County Fire talkgroup 87 (hex 57).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Unionville, start with the Downtown Helena site of Montana Public Safety Communications System, about 4 miles away. Its control channels: 159.12, 161.875 MHz.
Data updated .
Lewis and Clark County channels that also cover Unionville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lewis And Clark County Fire | Lewis And Clark County Fire – Rural Dispatch | 154.1600 In 158.8050 | 203.5 PL | FMN | WNQH392 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wolf Creek/Craig Fire Service Area | Operations | 154.3250 | FMN | WPRG547 |
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lewis and Clark County Fire | County Fire Dispatch | 87 | 57 | D |
| Lewis and Clark County Fire | County Fire Tactical | 89 | 59 | D |
Nearest trunked radio sites
Distances are measured from the center of Unionville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Unionville?
We do not have a fire dispatch channel listed specifically for Unionville. The county-level fire dispatch channels in the same county: Lewis And Clark County Fire 154.1600 MHz, narrow FM, 203.5 PL.
Do fire departments and EMS use a trunked radio system in Unionville?
Yes. The county-level systems that cover Unionville are Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Unionville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Unionville?
For Unionville, start with the Downtown Helena site of Montana Public Safety Communications System. Its control channels are 159.12, 161.875 MHz. Program a control channel first; the scanner finds the voice channels from it.