Skip to content

Wilsall Fire and EMS Frequencies

We do not have frequencies listed specifically for Wilsall in Park County, Montana yet. Countywide channels for Park County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Beacon Hill (Gallatin County / Bozeman), about 24 miles away.

About Wilsall Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Wilsall: Paradise Valley Fire Service Area 154.1900 MHz, narrow FM, no tone; Park County Fire 154.4150 MHz, narrow FM, no tone. County-level ems dispatch that covers Wilsall: Livingston Memorial Hospital 155.3250 MHz, narrow FM, no tone.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Park County channels that also cover Wilsall

Fire Dispatch

Fire Dispatch frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Paradise Valley Fire Service AreaParadise Valley Fire Service Area – Dispatch154.1900FMNWPGM864
Park County FireFire/EMS Dispatch154.4150
In 158.8350
FMNWPTT384

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Paradise Valley Fire Service AreaParadise Valley Fire Service Area – Fire Ground153.9500FMNWPGM864
Park County FireRural Fire Tactical154.1600FMNWNJR361
Park County FireSearch and Rescue155.2200FMN—

EMS Dispatch

EMS Dispatch frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Livingston Memorial HospitalLivingston Memorial Hospital – Dispatch155.3250FMNKEU673

EMS Talk-around

EMS Talk-around frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Livingston Memorial HospitalOperations/Security154.5150FMNKNGS201

Hospitals & Medical

Hospitals & Medical frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Livingston Memorial HospitalAmbulance-to-Hospital155.2800FMNKEU673

Nearest trunked radio sites

Distances are measured from the center of Wilsall.

Beacon Hill · Gallatin County / Bozeman
RFSS 1 · Site 5 (hex 5) · NAC 820 · about 24 mi away
Control 858.7125, 859.2125, 859.7125
Beacon Hill · Montana Public Safety Communications System
RFSS 1 · Site 30 (hex 1E) · NAC 160 · about 24 mi away
Control 155.04, 155.415
Voice 154.965, 155.94
Bozeman 800 · Montana Public Safety Communications System
RFSS 1 · Site 27 (hex 1B) · NAC 160 · about 28 mi away
Control 851.05, 851.35, 851.65
Voice 852.05, 852.35, 852.7, 853.05, 853.35
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Wilsall?

We do not have a fire dispatch channel listed specifically for Wilsall. The county-level fire dispatch channels in the same county: Paradise Valley Fire Service Area 154.1900 MHz, narrow FM, no tone; Park County Fire 154.4150 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Wilsall?

We do not have a EMS dispatch channel listed specifically for Wilsall. The county-level EMS dispatch channels in the same county: Livingston Memorial Hospital 155.3250 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Wilsall?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Wilsall?

For Wilsall, start with the Beacon Hill site of Gallatin County / Bozeman. Its control channels are 858.7125, 859.2125, 859.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.