About Gallatin River Ranch Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Gallatin River Ranch: Gallatin County Fire 154.0550 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Gallatin River Ranch: Gallatin County EMS 152.9825 MHz, narrow FM, no tone. Trunked: Gallatin County / Bozeman, for example Gallatin County Fire talkgroup 6913 (hex 1b01).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Gallatin County / Bozeman: 2 talkgroups; Montana Public Safety Communications System: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gallatin River Ranch, start with the Nixon Ridge site of Montana Public Safety Communications System, about 4 miles away. Its control channels: 154.235, 154.74 MHz.
Data updated .
Gallatin County channels that also cover Gallatin River Ranch
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gallatin County Fire | Gallatin County Fire – North | 154.0550 In 158.8800 | 146.2 PL | FMN | WPTH872 |
| Gallatin County Fire | Gallatin County Fire – West | 154.1450 | FMN | KNIG888 | |
| Gallatin County Fire | Gallatin County Fire – Central | 156.1800 In 159.3000 | FMN | WPXK784 | |
| Gallatin County Fire | Law Enforcement/Fire South | 158.7900 In 155.7000 | 192.8 PL | FMN | KNIG888 |
| Gallatin County Fire | Gallatin County Fire – East | 159.1050 In 156.2250 | FMN | WPXZ967 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gallatin County Fire | Gallatin County Fire – Tactical Channel | 154.4450 | FMN | WZZ208 | |
| Gallatin County Fire | Search & Rescue | 159.1500 | 123.0 PL | FMN | WPXD764 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gallatin County Fire | Gallatin County Fire – Countywide | 154.3850 | FMN | WNSA790 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gallatin County EMS | Summit Air | 152.9825 | FMN | — | |
| Gallatin County EMS | Sheriff/Big Sky EMS | 158.7900 | 192.8 PL | FMN | KNIG888 |
Gallatin County / Bozeman
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gallatin County Fire | North | 6913 | 1b01 | D |
| Gallatin County EMS | County Fire Dispatch | 6400 | 1900 | D |
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gallatin County EMS | South | 5067 | 13cb | D |
| Gallatin County EMS | North | 5157 | 1425 | D |
| Gallatin County EMS | American Medical Response | 5155 | 1423 | D |
Nearest trunked radio sites
Distances are measured from the center of Gallatin River Ranch.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Gallatin River Ranch?
We do not have a fire dispatch channel listed specifically for Gallatin River Ranch. The county-level fire dispatch channels in the same county: Gallatin County Fire 154.0550 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Gallatin River Ranch?
We do not have a EMS dispatch channel listed specifically for Gallatin River Ranch. The county-level EMS dispatch channels in the same county: Gallatin County EMS 152.9825 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Gallatin River Ranch?
Yes. The county-level systems that cover Gallatin River Ranch are Fire and EMS talkgroups are listed for Gallatin County / Bozeman: 2 talkgroups; Montana Public Safety Communications System: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gallatin River Ranch?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gallatin River Ranch?
For Gallatin River Ranch, start with the Nixon Ridge site of Montana Public Safety Communications System. Its control channels are 154.235, 154.74 MHz. Program a control channel first; the scanner finds the voice channels from it.