About Wheatland Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Wheatland: Broadwater County Fire 154.2050 MHz, narrow FM, no tone. County-level ems dispatch that covers Wheatland: Broadwater County EMS 155.7750 MHz, narrow FM, no tone. Trunked: Montana Public Safety Communications System, for example Broadwater County Fire talkgroup 253 (hex fd).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wheatland, start with the Nixon Ridge site of Gallatin County / Bozeman, about 11 miles away. Its control channels: 856.2625, 856.7625, 857.0875 MHz.
Data updated .
Broadwater County channels that also cover Wheatland
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Broadwater County Fire | Broadwater County Fire – Dispatch | 154.2050 | FMN | WPLY297 | |
| Broadwater County Fire | Fire Rural | 154.3100 | FMN | WPLY294 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Broadwater County Fire | Search & Rescue | 153.8750 | FMN | WQAX926 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Broadwater County EMS | Broadwater County EMS – Dispatch | 155.7750 In 158.9550 | FMN | WQDC483 |
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Broadwater County Fire | Broadwater County Fire – Dispatch | 253 | fd | D |
Nearest trunked radio sites
Distances are measured from the center of Wheatland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wheatland?
We do not have a fire dispatch channel listed specifically for Wheatland. The county-level fire dispatch channels in the same county: Broadwater County Fire 154.2050 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Wheatland?
We do not have a EMS dispatch channel listed specifically for Wheatland. The county-level EMS dispatch channels in the same county: Broadwater County EMS 155.7750 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Wheatland?
Yes. The county-level systems that cover Wheatland are Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wheatland?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wheatland?
For Wheatland, start with the Nixon Ridge site of Gallatin County / Bozeman. Its control channels are 856.2625, 856.7625, 857.0875, 857.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.