Skip to content

Broadwater County Fire and EMS Frequencies

Broadwater County in Montana has 4 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Broadwater County Fire and EMS Frequencies

Quick answer: Fire dispatch for Broadwater County: Broadwater County Fire 154.2050 MHz, narrow FM, no tone. EMS dispatch for Broadwater County: Broadwater County EMS 155.7750 MHz, narrow FM, no tone. Trunked: Montana Public Safety Communications System, for example Broadwater County Fire talkgroup 253 (hex fd).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Broadwater County, start with the Townsend site of Montana Public Safety Communications System. Its control channels: 142.4625, 149.225 MHz.

Data updated .

Broadwater County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Broadwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broadwater County FireBroadwater County Fire – Dispatch154.2050FMNWPLY297
Broadwater County FireFire Rural154.3100FMNWPLY294

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Broadwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broadwater County FireSearch & Rescue153.8750FMNWQAX926

EMS Dispatch

EMS Dispatch frequencies for Broadwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broadwater County EMSBroadwater County EMS – Dispatch155.7750
In 158.9550
FMNWQDC483

Broadwater County trunked talkgroups

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Broadwater County FireBroadwater County Fire – Dispatch253fdD

Radio system sites in Broadwater County

Program the control channel first; your scanner finds the voice channels from it.

Townsend · Montana Public Safety Communications System
RFSS 1 · Site 9 (hex 9) · NAC 166
Control 142.4625, 149.225
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Broadwater County

Common questions

What frequency does the fire department use in Broadwater County?

Fire dispatch channels listed for Broadwater County: Broadwater County Fire 154.2050 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Broadwater County?

EMS dispatch channels listed for Broadwater County: Broadwater County EMS 155.7750 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Broadwater County?

Yes. Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Broadwater County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Broadwater County?

For Broadwater County, start with the Townsend site of Montana Public Safety Communications System. Its control channels are 142.4625, 149.225 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Broadwater County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Broadwater County are marked encrypted.

Are Broadwater County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Broadwater County are marked encrypted.