Skip to content

Winston Fire and EMS Frequencies

We do not have frequencies listed specifically for Winston in Broadwater County, Montana yet. Countywide channels for Broadwater County that may also cover this area are shown below when we have them. The closest trunked radio site we have is East Helena (Montana Public Safety Communications System), about 15 miles away.

About Winston Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Winston: Broadwater County Fire 154.2050 MHz, narrow FM, no tone. County-level ems dispatch that covers Winston: Broadwater County EMS 155.7750 MHz, narrow FM, no tone. Trunked: Montana Public Safety Communications System, for example Broadwater County Fire talkgroup 253 (hex fd).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Winston, start with the East Helena site of Montana Public Safety Communications System, about 15 miles away. Its control channels: 154.355, 156.24 MHz.

Data updated .

Broadwater County channels that also cover Winston

Fire Dispatch

Fire Dispatch frequencies for Broadwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broadwater County FireBroadwater County Fire – Dispatch154.2050FMNWPLY297
Broadwater County FireFire Rural154.3100FMNWPLY294

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Broadwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broadwater County FireSearch & Rescue153.8750FMNWQAX926

EMS Dispatch

EMS Dispatch frequencies for Broadwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broadwater County EMSBroadwater County EMS – Dispatch155.7750
In 158.9550
FMNWQDC483

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Broadwater County FireBroadwater County Fire – Dispatch253fdD

Nearest trunked radio sites

Distances are measured from the center of Winston.

East Helena · Montana Public Safety Communications System
RFSS 1 · Site 2 (hex 2) · NAC 167 · about 15 mi away
Control 154.355, 156.24
Voice 155.07, 159.465, 161.95
Nob Hill 700 MHz · Montana Public Safety Communications System
RFSS 1 · Site 25 (hex 19) · NAC 160 · about 17 mi away
Control 769.1875, 770.0625, 771.0375
Voice 772.2125, 772.9875
Downtown Helena · Montana Public Safety Communications System
RFSS 1 · Site 1 (hex 1) · NAC 161 · about 20 mi away
Control 159.12, 161.875
Voice 159.285, 159.45, 159.465
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Winston?

We do not have a fire dispatch channel listed specifically for Winston. The county-level fire dispatch channels in the same county: Broadwater County Fire 154.2050 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Winston?

We do not have a EMS dispatch channel listed specifically for Winston. The county-level EMS dispatch channels in the same county: Broadwater County EMS 155.7750 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Winston?

Yes. The county-level systems that cover Winston are Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Winston?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Winston?

For Winston, start with the East Helena site of Montana Public Safety Communications System. Its control channels are 154.355, 156.24 MHz. Program a control channel first; the scanner finds the voice channels from it.