Skip to content

Manhattan Fire and EMS Frequencies

We do not have frequencies listed specifically for Manhattan in Gallatin County, Montana yet. Countywide channels for Gallatin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Nixon Ridge (Montana Public Safety Communications System), about 7 miles away.

About Manhattan Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Manhattan: Gallatin County Fire 154.0550 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Manhattan: Gallatin County EMS 152.9825 MHz, narrow FM, no tone. Trunked: Gallatin County / Bozeman, for example Gallatin County Fire talkgroup 6913 (hex 1b01).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Gallatin County / Bozeman: 2 talkgroups; Montana Public Safety Communications System: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Manhattan, start with the Nixon Ridge site of Montana Public Safety Communications System, about 7 miles away. Its control channels: 154.235, 154.74 MHz.

Data updated .

Gallatin County channels that also cover Manhattan

Fire Dispatch

Fire Dispatch frequencies for Gallatin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gallatin County FireGallatin County Fire – North154.0550
In 158.8800
146.2 PLFMNWPTH872
Gallatin County FireGallatin County Fire – West154.1450FMNKNIG888
Gallatin County FireGallatin County Fire – Central156.1800
In 159.3000
FMNWPXK784
Gallatin County FireLaw Enforcement/Fire South158.7900
In 155.7000
192.8 PLFMNKNIG888
Gallatin County FireGallatin County Fire – East159.1050
In 156.2250
FMNWPXZ967

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gallatin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gallatin County FireGallatin County Fire – Tactical Channel154.4450FMNWZZ208
Gallatin County FireSearch & Rescue159.1500123.0 PLFMNWPXD764

Fire Talk-around

Fire Talk-around frequencies for Gallatin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gallatin County FireGallatin County Fire – Countywide154.3850FMNWNSA790

EMS Dispatch

EMS Dispatch frequencies for Gallatin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gallatin County EMSSummit Air152.9825FMN—
Gallatin County EMSSheriff/Big Sky EMS158.7900192.8 PLFMNKNIG888

Gallatin County / Bozeman

Gallatin County / Bozeman talkgroups
AgencyDescriptionTalkgroupHexMode
Gallatin County FireNorth69131b01D
Gallatin County EMSCounty Fire Dispatch64001900D

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Gallatin County EMSSouth506713cbD
Gallatin County EMSNorth51571425D
Gallatin County EMSAmerican Medical Response51551423D

Nearest trunked radio sites

Distances are measured from the center of Manhattan.

Nixon Ridge · Montana Public Safety Communications System
RFSS 1 · Site 31 (hex 1F) · NAC 160 · about 7 mi away
Control 154.235, 154.74
Voice 154.875, 161.875
Nixon Ridge · Gallatin County / Bozeman
RFSS 1 · Site 4 (hex 4) · NAC 820 · about 7 mi away
Control 856.2625, 856.7625, 857.0875, 857.9875, 858.4625, 858.9375, 859.4625, 859.9375
Bozeman Simulcast · Gallatin County / Bozeman
RFSS 1 · Site 1 (hex 1) · NAC 820 · about 20 mi away
Control 854.9625, 855.4625, 855.9625, 856.4875, 856.9875, 857.2125, 857.7125, 858.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Manhattan?

We do not have a fire dispatch channel listed specifically for Manhattan. The county-level fire dispatch channels in the same county: Gallatin County Fire 154.0550 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Manhattan?

We do not have a EMS dispatch channel listed specifically for Manhattan. The county-level EMS dispatch channels in the same county: Gallatin County EMS 152.9825 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Manhattan?

Yes. The county-level systems that cover Manhattan are Fire and EMS talkgroups are listed for Gallatin County / Bozeman: 2 talkgroups; Montana Public Safety Communications System: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Manhattan?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Manhattan?

For Manhattan, start with the Nixon Ridge site of Montana Public Safety Communications System. Its control channels are 154.235, 154.74 MHz. Program a control channel first; the scanner finds the voice channels from it.