Skip to content

Phillips County Fire and EMS Frequencies

Phillips County in Montana has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Phillips County Fire and EMS Frequencies

Quick answer: Fire dispatch for Phillips County: Phillips County Fire 154.3550 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Phillips County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County FirePhillips County Fire – Dispatch154.3550FMNWPXU343

Radio system sites in Phillips County

Program the control channel first; your scanner finds the voice channels from it.

Antoine Butte · Montana Public Safety Communications System
RFSS 1 · Site 20 (hex 14) · NAC 160
Control 153.98, 155.31
Voice 151.325, 153.86
Saco · Montana Public Safety Communications System
RFSS 1 · Site 21 (hex 15)
Control 151.145, 151.295
Voice 151.16, 151.37, 155.835
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Phillips County

Common questions

What frequency does the fire department use in Phillips County?

Fire dispatch channels listed for Phillips County: Phillips County Fire 154.3550 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Phillips County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Phillips County?

For Phillips County, start with the Antoine Butte site of Montana Public Safety Communications System. Its control channels are 153.98, 155.31 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Phillips County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Phillips County are marked encrypted.