Skip to content

Sleeping Buffalo Fire and EMS Frequencies

We do not have frequencies listed specifically for Sleeping Buffalo in Phillips County, Montana yet. Countywide channels for Phillips County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Saco (Montana Public Safety Communications System), about 4 miles away.

About Sleeping Buffalo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sleeping Buffalo: Phillips County Fire 154.3550 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Phillips County channels that also cover Sleeping Buffalo

Fire Dispatch

Fire Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County FirePhillips County Fire – Dispatch154.3550FMNWPXU343

Nearest trunked radio sites

Distances are measured from the center of Sleeping Buffalo.

Saco · Montana Public Safety Communications System
RFSS 1 · Site 21 (hex 15) · about 4 mi away
Control 151.145, 151.295
Voice 151.16, 151.37, 155.835
Gideon · Montana Public Safety Communications System
RFSS 2 · Site 6 (hex 6) · about 45 mi away
Control 154.1, 161.9
Voice 151.31, 154.13
Opheim · Montana Public Safety Communications System
RFSS 2 · Site 10 (hex A) · about 55 mi away
Control 151.43
Voice 151.34, 155.4225
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sleeping Buffalo?

We do not have a fire dispatch channel listed specifically for Sleeping Buffalo. The county-level fire dispatch channels in the same county: Phillips County Fire 154.3550 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Sleeping Buffalo?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sleeping Buffalo?

For Sleeping Buffalo, start with the Saco site of Montana Public Safety Communications System. Its control channels are 151.145, 151.295 MHz. Program a control channel first; the scanner finds the voice channels from it.