Skip to content

Prairie County Fire and EMS Frequencies

Prairie County in Montana has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Prairie County Fire and EMS Frequencies

Quick answer: Fire dispatch for Prairie County: Prairie County Fire 154.3550 MHz, P25, no tone. EMS dispatch for Prairie County: Prairie Community Hospital 155.2950 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Prairie County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie County FirePrairie County Fire – Dispatch154.3550P25WPUD269

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie County FirePrairie County Fire – Statewide Mutual Aid154.2800FMNWPUD269

EMS Dispatch

EMS Dispatch frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie Community HospitalPrairie Community Hospital – Dispatch155.2950FMNKNBL845

Hospitals & Medical

Hospitals & Medical frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie Community HospitalPrairie Community Hospital – Hospital Channel155.2800FMNKNBL845

Radio system sites in Prairie County

Program the control channel first; your scanner finds the voice channels from it.

Fallon · Montana Public Safety Communications System
RFSS 2 · Site 2 (hex 2)
Control 161.9625, 161.9875
Site 2-008 TBD · Montana Public Safety Communications System
RFSS 2 · Site 8 (hex 8)
Control 161.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Prairie County

Common questions

What frequency does the fire department use in Prairie County?

Fire dispatch channels listed for Prairie County: Prairie County Fire 154.3550 MHz, P25, no tone.

What frequency does EMS or the ambulance service use in Prairie County?

EMS dispatch channels listed for Prairie County: Prairie Community Hospital 155.2950 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Prairie County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Prairie County?

For Prairie County, start with the Fallon site of Montana Public Safety Communications System. Its control channels are 161.9625, 161.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Prairie County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Prairie County are marked encrypted.