Skip to content

Fallon Fire and EMS Frequencies

We do not have frequencies listed specifically for Fallon in Prairie County, Montana yet. Countywide channels for Prairie County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Fallon (Montana Public Safety Communications System), about 6 miles away.

About Fallon Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fallon: Prairie County Fire 154.3550 MHz, P25, no tone. County-level ems dispatch that covers Fallon: Prairie Community Hospital 155.2950 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Prairie County channels that also cover Fallon

Fire Dispatch

Fire Dispatch frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie County FirePrairie County Fire – Dispatch154.3550P25WPUD269

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie County FirePrairie County Fire – Statewide Mutual Aid154.2800FMNWPUD269

EMS Dispatch

EMS Dispatch frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie Community HospitalPrairie Community Hospital – Dispatch155.2950FMNKNBL845

Hospitals & Medical

Hospitals & Medical frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie Community HospitalPrairie Community Hospital – Hospital Channel155.2800FMNKNBL845

Nearest trunked radio sites

Distances are measured from the center of Fallon.

Fallon · Montana Public Safety Communications System
RFSS 2 · Site 2 (hex 2) · about 6 mi away
Control 161.9625, 161.9875
Site 2-008 TBD · Montana Public Safety Communications System
RFSS 2 · Site 8 (hex 8) · about 11 mi away
Control 161.8125
Makoshika · Montana Public Safety Communications System
RFSS 2 · Site 5 (hex 5) · about 26 mi away
Control 161.9125, 161.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fallon?

We do not have a fire dispatch channel listed specifically for Fallon. The county-level fire dispatch channels in the same county: Prairie County Fire 154.3550 MHz, P25, no tone.

What frequency does EMS or the ambulance service use in Fallon?

We do not have a EMS dispatch channel listed specifically for Fallon. The county-level EMS dispatch channels in the same county: Prairie Community Hospital 155.2950 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Fallon?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Fallon?

For Fallon, start with the Fallon site of Montana Public Safety Communications System. Its control channels are 161.9625, 161.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.