Skip to content

West Glendive Fire and EMS Frequencies

We do not have frequencies listed specifically for West Glendive in Dawson County, Montana yet. Countywide channels for Dawson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Makoshika (Montana Public Safety Communications System), about 5 miles away.

About West Glendive Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers West Glendive: Dawson County Fire 154.1600 MHz, P25, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Dawson County channels that also cover West Glendive

Fire Dispatch

Fire Dispatch frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County FireWest Glendive Fire District154.1600
In 158.8650
P25WQEY286

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County FireSearch & Rescue155.2650FMNWNWC784

Nearest trunked radio sites

Distances are measured from the center of West Glendive.

Makoshika · Montana Public Safety Communications System
RFSS 2 · Site 5 (hex 5) · about 5 mi away
Control 161.9125, 161.9375
Fallon · Montana Public Safety Communications System
RFSS 2 · Site 2 (hex 2) · about 23 mi away
Control 161.9625, 161.9875
Site 2-008 TBD · Montana Public Safety Communications System
RFSS 2 · Site 8 (hex 8) · about 34 mi away
Control 161.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in West Glendive?

We do not have a fire dispatch channel listed specifically for West Glendive. The county-level fire dispatch channels in the same county: Dawson County Fire 154.1600 MHz, P25, no tone.

What scanner do I need to listen to fire and EMS in West Glendive?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in West Glendive?

For West Glendive, start with the Makoshika site of Montana Public Safety Communications System. Its control channels are 161.9125, 161.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.