About Crane Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Crane: Richland County Fire 158.8200 MHz, narrow FM, 712 DPL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Richland County channels that also cover Crane
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Richland County Fire | Richland County Fire – Dispatch | 158.8200 In 155.8650 | 712 DPL | FMN | WNNU365 |
Nearest trunked radio sites
Distances are measured from the center of Crane.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Crane?
We do not have a fire dispatch channel listed specifically for Crane. The county-level fire dispatch channels in the same county: Richland County Fire 158.8200 MHz, narrow FM, 712 DPL.
What scanner do I need to listen to fire and EMS in Crane?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Crane?
For Crane, start with the Richland County Sheriff Office site of Montana Public Safety Communications System. Its control channels are 161.875, 161.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.