Skip to content

Richland County Fire and EMS Frequencies

Richland County in Montana has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Richland County Fire and EMS Frequencies

Quick answer: Fire dispatch for Richland County: Richland County Fire 158.8200 MHz, narrow FM, 712 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Richland County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Richland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richland County FireRichland County Fire – Dispatch158.8200
In 155.8650
712 DPLFMNWNNU365

Radio system sites in Richland County

Program the control channel first; your scanner finds the voice channels from it.

Fox Creek · Montana Public Safety Communications System
RFSS 2 · Site 3 (hex 3) · NAC 163
Control 154.055, 154.175
Voice 154.3325, 161.95
Richland County Sheriff Office · Montana Public Safety Communications System
RFSS 2 · Site 11 (hex B) · NAC 16B
Control 161.875, 161.8875
Voice 161.8
Antelope Butte · Montana Public Safety Communications System
RFSS 2 · Site 12 (hex C) · NAC 16C
Control 154.235, 154.37
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Richland County

Common questions

What frequency does the fire department use in Richland County?

Fire dispatch channels listed for Richland County: Richland County Fire 158.8200 MHz, narrow FM, 712 DPL.

What scanner do I need to listen to fire and EMS in Richland County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Richland County?

For Richland County, start with the Fox Creek site of Montana Public Safety Communications System. Its control channels are 154.055, 154.175 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Richland County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Richland County are marked encrypted.