Skip to content

Glendive Fire and EMS Frequencies

Glendive in Dawson County, Montana has 6 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Makoshika (Montana Public Safety Communications System), about 4 miles away.

About Glendive Fire and EMS Frequencies

Quick answer: Fire dispatch for Glendive: Glendive Fire 154.3550 MHz, narrow FM, no tone.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Glendive conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Glendive
AgencyDescriptionFrequency (MHz)ToneModeFCC
Glendive FireGlendive Fire – Dispatch154.3550FMNWPKF471

Fire Talk-around

Fire Talk-around frequencies for Glendive
AgencyDescriptionFrequency (MHz)ToneModeFCC
Glendive FireDPW/Fire/Police Common155.7150FMNWPYV607

EMS Talk-around

EMS Talk-around frequencies for Glendive
AgencyDescriptionFrequency (MHz)ToneModeFCC
Glendive EMSGlendive EMS – Alternate (280)155.2800FMNKUX494
Glendive EMSGlendive EMS – Alternate (325)155.3250FMNKUX494
Glendive EMSGlendive EMS – Alternate (385)155.3850FMNKUX494

Hospitals & Medical

Hospitals & Medical frequencies for Glendive
AgencyDescriptionFrequency (MHz)ToneModeFCC
Glendive HospitalGlendive Medical Center ER155.3400FMNKUX494

Dawson County channels that also cover Glendive

Fire Dispatch

Fire Dispatch frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County FireWest Glendive Fire District154.1600
In 158.8650
P25WQEY286

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County FireSearch & Rescue155.2650FMNWNWC784

Nearest trunked radio sites

Distances are measured from the center of Glendive.

Makoshika · Montana Public Safety Communications System
RFSS 2 · Site 5 (hex 5) · about 4 mi away
Control 161.9125, 161.9375
Fallon · Montana Public Safety Communications System
RFSS 2 · Site 2 (hex 2) · about 25 mi away
Control 161.9625, 161.9875
Site 2-008 TBD · Montana Public Safety Communications System
RFSS 2 · Site 8 (hex 8) · about 36 mi away
Control 161.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Glendive?

Fire dispatch channels listed for Glendive: Glendive Fire 154.3550 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Glendive?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Glendive?

For Glendive, start with the Makoshika site of Montana Public Safety Communications System. Its control channels are 161.9125, 161.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Glendive fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Glendive are marked encrypted.