Skip to content

Dawson County Fire and EMS Frequencies

Dawson County in Montana has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Dawson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dawson County: Dawson County Fire 154.1600 MHz, P25, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Dawson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County FireWest Glendive Fire District154.1600
In 158.8650
P25WQEY286

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County FireSearch & Rescue155.2650FMNWNWC784

Radio system sites in Dawson County

Program the control channel first; your scanner finds the voice channels from it.

Makoshika · Montana Public Safety Communications System
RFSS 2 · Site 5 (hex 5)
Control 161.9125, 161.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dawson County

Common questions

What frequency does the fire department use in Dawson County?

Fire dispatch channels listed for Dawson County: Dawson County Fire 154.1600 MHz, P25, no tone.

What scanner do I need to listen to fire and EMS in Dawson County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Dawson County?

For Dawson County, start with the Makoshika site of Montana Public Safety Communications System. Its control channels are 161.9125, 161.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dawson County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Dawson County are marked encrypted.