Skip to content

Alton Fire and EMS Frequencies

Alton in Belknap County, New Hampshire has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Manchester Simulcast (Manchester), about 39 miles away.

About Alton Fire and EMS Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Alton conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Alton
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alton FireAlton Fire – Tactical Channel151.1675CSQFMNWPYH574
Alton FireAlton Fire – Tactical Channel155.1075CSQFMNWPYH574

Nearest trunked radio sites

Distances are measured from the center of Alton.

Manchester Simulcast · Manchester
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 39 mi away
Control 857.9375, 858.2125, 858.4875, 859.4875
Voice 854.0625, 854.9875, 856.2125, 856.4875, 856.7625, 857.2375, 857.4875
Colonial Drive · Litchfield
Site 1 (hex 1) · about 45 mi away
Voice 453.15, 453.5
Highlander Ct · Litchfield
Site 2 (hex 2) · about 45 mi away
Voice 460.1875, 460.525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Alton?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Alton?

For Alton, start with the Manchester Simulcast site of Manchester. Its control channels are 857.9375, 858.2125, 858.4875, 859.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Alton fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Alton are marked encrypted.